Qualification Test
Prior to the Production of a New Connector Type or Connector Range
Pressure Test:
5 x cycle test 0 to 800 bar, holding time 10 minutes per cycle
1 x 0 to 800 bar holding time 1 hour
Electrical Test During Pressure Test:
Continuity test: Pin to pin
Insulation test between all contacts and body/tank: At 500 V DC. Minimum 200 Mohm
Electrical Test After Pressure Test:
Continuity test: Pin to pin
Insulation test between all contacts and body: At 500 V DC. Minimum 200 Mohm
High pot test: At 2 x Voltage rating plus 1 KV
CONTACT US FOR MORE INFO
Call us
(858) 454-4044
