SubConn Ethernet Circular – 8 Contacts

Drawing Information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector Specifications

• Voltage rating: 250 V DC/AC rms
• Data rate: 1 Gbit/s (up to 75 m)
• Insulation resistance: > 200 Mohm
• Contact resistance: < 0.01 ohm
• Wet matings: > 500
• Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
• Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
• Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
• Qualified pressure tested: 600 bar, 8,700 psi
• Depth rating PEEK: 300 bar, 4,350 psi

Material Specifications

• Connector body: Chloroprene rubber
• Bulkhead body: Brass, stainless steel, titanium, anodized aluminum, or PEEK
• Contacts: Female sockets in gold-plated brass UNS – C36000, Male pins in gold-plated beryllium copper
• O-rings: Nitrile
• Locking sleeves: POM or stainless steel
• Snap rings: Stainless steel AISI 302
• Inline cable (3.3 ft, 100 cm): 4 pair 24 AWG, 0.20 mm2 PUR
• Bulkhead and PBOF leads (3.3 ft, 100 cm): CAT 5E patch cable incl. RJ 45 connector (not installed)
• OM leads (3″), 7 cm: CAT 5E patch cable

Face View (Male)

Inline Cable Color Code

1-2: Brown, Brown/white*
3-4: Blue, Blue/white*
5-6: Orange, Orange/white*
7-8: Green, Green/white*

* Twisted pairs

Nominal Cable Outside Diameter (OD)

PUR cable 0.410”, 10.4 mm

Additional Information

The inline connector is available in a shallow water version.
Standard RJ45 cannot be mounted on an inline cable and will require an RJ45 Phoenix connector or equivalent.

Step Files

X_B files

Related files

SubConn Ethernet Circular – 8 contacts